Home > Windows 7 > Windows 7 Does Not Boot When I Unplug Optical Drive.

Windows 7 Does Not Boot When I Unplug Optical Drive.

I'm turning 360° here...first things first: BOOTSECT within Windows does not work.Now to what I've tried:1. Learn more about this here. PCWorld PCWorld helps you navigate the PC ecosystem to find the solved Windows won't boot - can I clone the drive and restore it after a reinstall of Windows 7? It was quite simple that do not use 3.0 while installation on old laptops. http://skdcom.com/windows-7/problem-with-install-from-external-optical.html

No Boot Device When Removing Secondary Drive!? It is the post by StriderRyu.Tanks for all your posts. Also, no RAID setting in this old BIOS. Try - Setup: only OS HD connected- booted windows install disk- opened repair dialog- Asked to auto-repair detected Problems - Applied- !!!

This OS boot has no stall; right into desktop in about 20-25 seconds. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. You might find only one hard drive option in the boot priority list.

If I switch the drive mode to native IDE then I can boot just fine from either of the Opitcal Sata drives. After that I had to click on "Apply", plug the HDD back into my computer and everything was OK. Go to Device Manager to check for the driver status. My name is Aseem Kishore and I work as a Systems Analyst in Dallas, TX.

then click next.Setup will automatically scan for errors and fix it. Cheers gang! - Steve Reply Rob says: December 17, 2016 at am10:26 Switching to another USB port worked for me. I have done some searching and found... My System Specs System Manufacturer/Model Number 8 home-builds from the 80's into 2004 OS W7 Home Premium 32bit pscowboy View Public Profile Find More Posts by pscowboy 19 Dec 2011

Boot to Windows Login Screen.And here I am back from where I started with one additional information...The Windows Repair found 1 root cause why it failed or wasn't able to repair:"A Anyway, I loaded it up (don't know why I thought it would make any difference) and voilà, windows began to install. You may want to change this to AHCI and see if it Boots from your USB stick. In any case if its working and you're happy thats all that matters.

The non... http://www.tomshardware.com/forum/70251-63-windows-boot-removing-secondary-drive I have two HDDs - C and D and two CD/DVD optical drives which should be E & F but am only seeing E - that is, only one of the Thanks! Assuming the drives are both listed, it’s up to you to examine the menus, find the boot order, and change the drives.

I have to disconnect all USB plugs and devices, switch off, disconnect the battery, reconnect the battery and power supply and then power up. his comment is here If by chance there happens to be a boot.ini or other such files, try to delete them and then restart your computer. I managed to solve the issue by connecting the HDD to another computer, and then fixing the MBR issues there. Upon bootup, real quick to the "Starting Windows" with the swirly stuff.

I tried all the various other solutions I could find, none of which were working (I suspect because I'm downgrading from windows 10 back to 7). I already set the "Boot device priority" to "Removable device" first, and then "CD/DVD" but it's still the same. I'm creating the image now, and I have a good feeling that this will be the solution to my problem! this contact form Usually the CD/DVD or USB drive is first, and if no files are found it boots normally from the hard drive and loads Windows.

So if the USB driver is not recognized by Windows PE, you may encounter this problem and cannot install the system. Performed a boot, with logging, and did a printout. Try - Setup: OS HD and DISK 0 connected- normalt startup (w/o selecting boot device manually)Result: Success.

Reply Zaff says: December 30, 2016 at am2:59 I had the same problem, it was because I was installing with a USB mouse plugged in.

Get the answer me_shaFeb 21, 2013, 10:57 PM No Bios Error. The following dialog now shows my Windows 7 installation again.- applied DISKPART / BOOTSECT procedures as in Try 1- tried to boot from Result: Boot crashed during Windows Logo4. thanks. vikrant456Nov 17, 2013, 8:42 AM i have p4 computers.

Mobo instructions said USB3 drivers were required to make USB keyboard work during OS installation, and to put the mobo support CD in the DVD drive during installation (or modify the Building a Syringe Gun What's going on legally between CBS/Paramount and Axanar and how does it relate to Star Trek: Discovery (if at all)? Cheers mate! navigate here Infact After OS Selection Screen (got Ubuntu as second OS as Windows 7 also on Disk 2) Windows tries to boot.

My only option is to connect the HDD to a working laptop and install windows there. If you want to be hardcore, you can always use a program like dban to wipe the drive completely.